Roberts Gorden DAT100, DAT75, DAT90, DAT115 service manual cm is necessary to service heater

DUALAIR® HEATING AND COOLING UNITS INSTALLATION OPERATION AND SERVICE MANUAL

WARNING

Fire Hazard

Some objects will catch fire or explode when placed close to heater.

Keep all flammable objects, liquids and vapours the required distance away from the heater.

Failure to follow these instructions can result in death, injury or property damage.

Figure 2: Installation Clearances and Clearances to Combustibles

Installation Clearances

Roof Terminal

			Alternative
Air	Flue		Wall
Intake			Terminal
15 cm
			Condense
		Air Flow	Drain
			Install to
			suitable drain,
			See Page 3,
			Figure 1.
		60 cm
3 m
	Insulated
2.5 - 3.5 m*	Refrigerant pipes
	to cooling coil	Customers
	by Customer
		Suitable
		Condenser
		Unit

*Free blowing DualAir® units may be mounted at a higher level if destratification fans and/or turn down nozzles are installed.

Clearances to Combustibles

15 cm

50 cm 50 cm**

30 cm

**80 cm is necessary to service heater.

Free blowing DualAir® units must always be installed at least 1.8 m above the floor. Ducted installations may be floor mounted.

The flue pipe must have clearance from combustibles by 5 cm.

If installed at low levels where individuals can come in contact with hot heat exchanger components, adequate guarding must be provided.

All distances are minimum clearance requirements for service access, air flow and safety.

4