Roberts Gorden DAT115 Heater Installation 5.1 General, Handling, Shelf Mounting and Suspension

SECTION 5: HEATER INSTALLATION

SECTION 5: HEATER INSTALLATION 5.1 General

DualAir® units are designed for installation above 2.5 m. When connected to duct delivery systems any suitable location will be acceptable.

For floor mounting, the DualAir® unit may stand directly on its base.

5.2 Handling

All DualAir® units have steel channel sections at the base to be used to support the equipment. Three steel sections are also provided across the top of the unit for support. The DualAir® unit may be suspended from these top sections.

The DualAir® unit is heavy and proper handling equipment must be used by trained engineers.

5.3 Shelf Mounting and Suspension

WARNING

Crush Hazard

Use 12 mm steel drop rod minimum.

Failure of the supports can result in death, injury

or property damage.

For typical suspension See Page 9, Figure 3.

Figure 3: Suspension Methods

12 mm Steel Drop Rod Nut

Washers

Nut

Locknut

Rolled Steel

Channel

Base Floor

9