SECTION 5: HEATER INSTALLATION
SECTION 5: HEATER INSTALLATION 5.1 General
DualAir® units are designed for installation above
2.5m. When connected to duct delivery systems any suitable location will be acceptable.
For floor mounting, the DualAir® unit may stand directly on its base.
5.2 Handling
All DualAir® units have steel channel sections at the base to be used to support the equipment. Three steel sections are also provided across the top of the unit for support. The DualAir® unit may be suspended from these top sections.
The DualAir® unit is heavy and proper handling equipment must be used by trained engineers.
5.3 Shelf Mounting and Suspension
WARNING
Crush Hazard
Use 12 mm steel drop rod minimum.
Failure of the supports can result in death, injury
or property damage.
For typical suspension See Page 9, Figure 3.
Figure 3: Suspension Methods
12mm 
Steel
Drop Rod
Nut 
Washers 
Nut 
Locknut 
Rolled Steel
Channel
Base | Floor |
9
