Roland 5 manual Update the Jupiter

Europa User Guide Europa Firmware Update Utility

Step 3: Update the Jupiter 6

Once the image is selected, click “Update” to update Europa:

The process of updating can take anywhere from 15 seconds to a minute, depending on the size of the image, the speed of the host computer, and the number of other running processes. The LEDs on the Jupiter 6 will shimmer during updating – this is normal! If any errors occur during the update, a window will pop up indicating the failure.

To cancel the update process, click the “Cancel” button AND CONTINUE HOLDING THE MOUSE BUTTON DOWN until the “Cancel” button is highlighted (which may take up to three seconds). The mouse button can then be released, and the process will cancel.

A successful update will look like this:

Click “OK” to continue. Europa was successfully updated! The new version number will be shown in the main window.

Additional Notes on the Macintosh EFUU

Manually setting the firmware image file's creator and type codes both to 'EFUU' should result in the file getting the official EFUU document icon. This is not required in order to use the file with EFUU, but it does help aesthetics.

EFUU Doesn't support opening the image file by double-clicking the file's icon or by file drag-and-drop. However, double-clicking the file's icon will open EFUU, as will file drag-and-drop - only if the file's creator has been set to 'EFUU'. In any case, the Find Image button will still need to be used to open the Europa image file.

Page 55