Roland BR-600 , Acoustic Guitar Simulator Acoustic Processor, Bass Simulator

101
Insert Effect Parameter Functions
Rev0.10
Section 3
This simulates the sound of an acoustic guitar. It allows you
to use an electric guitar to produce sounds similar to those
of an acoustic guitar.
* If you set the pickup selector of your guitar to the front
position, the desired effect will be easier to achieve.
On/Off OFF, ON
This parameter turns the acoustic guitar simulator effect on/off.
PickUp SINGLE, HUMBUC K
Set this to the type of pickup on the connected guitar.
Charct
This selects one of the four types of sounds.
STD (standard) :
This is a normal acoustic guitar.
JUMBO :
This is an acoustic guitar with a body that is bigger than
STANDARD. The bass sound is powerful.
ENHANCE :
This is an acoustic guitar that with a more responsive
attack, so the guitar will retain more of its prominence in
almost any situation.
PIEZO :
This simulates the sound you would get from a pickup
installed on an electric-acoustic guitar.
During the attack, a certain amount of compression will be
applied.
Top-Hi -100 – +100
Adjust the level of the direct sound from the strings. That is,
it adjusts the harmonic contents.
Top-Mid -100 – +100
This adjusts the interference to the strings made by the top
plate. That is, it adjusts the attack sense.
Body -100 – +100
This adjusts the resonance of the sound caused by the body.
That is, it adjusts the softness and fatness of the sound
which is the typical characteristics of acoustic guitars.
Level 0 – 100
This adjusts the volume of the acoustic guitar simulator.
* If Top-Hi, Top-Mid, and Body are all set to “-100,” there
will be no sound.
With this feature, you can change the sound from a pickup
on an electric-acoustic guitar into a richer sound, similar to
that obtained by a microphone placed near a guitar. Best
results will be achieved when stereo recording.
On/Off OFF, ON
This parameter turns the acoustic processor effect on/off.
Body 0 – 100
This adjusts the resonance of the sound caused by the body.
That is, it adjusts the softness and fatness of the sound
which is the typical characteristics of acoustic guitars.
Mic Dist 0 – 100
This simulates the distance between the microphone
capturing the sound of an acoustic guitar and the guitar
itself.
Level 0 – 100
This adjusts the volume of the acoustic processor.
Simulates the sound of a bass guitar. Obtain the sound of a
bass guitar while playing an electric guitar.
You should avoid playing chords when using the Bass
Simulator.
On/Off OFF, ON
This parameter turns the bass simulator effect on/off.
Charct LOOSE, TIGHT
Bass tone characteristic is set. When “LOOSE” is selected, as
if the string gauge was getting thicker.
Level 0 – 100
This adjusts the volume of the bass simulator.
Parameter List
The trademarks listed in this document are trademarks of their respective owners, which are separate companies from BOSS.
Those companies are not affiliated with BOSS and have not licensed or authorized BOSS’s BR-600. Their marks are used
solely to identify the equipment whose sound is simulated by BOSS’s BR-600.
Acoustic Guitar Simulator Acoustic Processor
Bass Simulator
BR600_e2 101ページ ２００６年４月１７日 月曜日 午前９時３分