32
Rev0.10

Listening to a Demo Song

Upon power-up, the song that was selected before the
power was turned off is selected, and the data of that song
is loaded. As soon as the data has been loaded, the Play
screen appears in the display.

fig.00-170

1

Confirm that [PAD] is not lit, then press [UTILITY].

2

Press CURSOR [ ] [ ] to move the cursor to
“SEL,” and press [ENTER].

The Song Select screen appears in the display.

fig.00-180

3

Turn the TIME/VALUE dial to select “01: Lydia”.

4

Press [ENTER].

1

Move the TRACK faders 1–4, 5/6, 7/8 and the
RHYTHM fader to the positions shown in the figure
below, and lower the MASTER fader.

fig.00-190

2

Press [PLAY].

fig.00-200

The song starts. Slowly increase the MASTER fader
and adjust the volume to the desired level.

3

Slide the TRACK faders to adjust the volume of each
track to the desired level.

Selecting a demo song

(Song Select)

12

2,4 3

Playing back a demo song

• The BR-600 comes programmed with one demo
song. When the power is first turned on, the demo
song is automatically selected, and the data
required for playback is loaded.
• Use of the demo song supplied with this product
for any purpose other than private, personal
enjoyment without the permission of the copyright
holder is prohibited by law. Additionally, this data
must not be copied, nor used in a secondary
copyrighted work without the permission of the
copyright holder.
fig.00-201
* Only "Lydia" appears in the display.
Twisted Lydia
© Robert Marcello 2005
Title
Composer
Copyright
Robert Marcello
BR600_e2 32 ページ ２００６年４月１７日　月曜日　午前９時３分