200
Rev0.10

Conserving Battery Power (Power Save)

Your BR-600 is equipped with a power save function that
limits the current dissipation during use.
When the power save function is activated, if no button, or
TIME/VALUE dial on the BR-600 is used for a certain
amount of time, the BR-600 will enter the standby state and
turn off the display backlight and button indicators.
Also, when in the standby state, the display will appear as
shown below.

fig.06-310

Perform the procedure given below to activate the power
save function.

1

Confirm that [PAD] is not lit, then press [UTILITY].

2

Press CURSOR [ ] [ ] to move the cursor to
“SYS,” and press [ENTER].

fig.06-320

3

Press CURSOR [ ] [ ] to select “PowerSave,” and
turn the TIME/VALUE dial to set the time until the
Power Save function is activated.

Valid Settings :

OFF, 1min, 3min, 5min, 10min

fig.06-330

4

Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.

* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.

■

Deactivating the power save

function

Press any of the panel buttons to deactivate power save.
• The power save function is not activated during
recording and playback of songs, even when no
button or TIME/VALUE dial is used for the set
amount of time.
• The power save function is especially helpful
when the BR-600 is running on battery power.
• After the power save function is deactivated, the
Play screen appears.
BR600_e2 200ページ ２００６年４月１７日　月曜日　午前９時３分