Rev0.10

143

Section 4

Playing Rhythm Arrangements

Now try selecting an arrangement you like from the internal
arrangements and then have that arrangement play back.

1

Confirm that [PAD] is not lit, then press [ARRANGE]
so that the button lights.
The BR-600 switches to Arrangement mode, enabling
arrangements to be played.

fig.04-300

[RHYTHM ON/OFF] simultaneously lights, confirm
that the rhythms are enabled.

2

Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select the arrangement you want to play.

P01 – P50 :

Preset arrangements 1 – 50

S01 – S05 :

Song arrangements 1 – 5

3

Press [EXIT].

Return to the Play screen.

4

Press [ZERO].

Return to the beginning of the song.

5

Press [PLAY].

When the recorder’s playback begins, the selected
arrangement begins playing.

6

Adjust the RHYTHM fader and MASTER fader to
appropriate levels.

7

Press [STOP] to stop the performance.

You can temporarily change the tempo of the arrangement
being played by carrying out the following procedure while
the Play screen is displayed.

1

Use CURSOR [ ] [ ] to position the cursor at the
indication of the tempo in the display.

fig.04-310

2

Turn the TIME/VALUE dial to adjust the tempo.

You can temporarily change the tempo of the arrangement
by the timing with which you press [TAP(TEMPO)].
Tap on [TAP(TEMPO)] four or more times to change the
tempo of the arrangement. The tempo becomes that in
which you tapped.

fig.04-290
P: Preset / S: Song Arrangement
NameNumber
When the BR-600 is shipped from the factory, the song
arrangements (S01 – S05) contain no data, thus no
arrangements are played even when selected.

Changing the Tempo of an

Arrangement

Using the TAP Button to Change

the Tempo of an Arrangement

Tempo
• The arrangement’s tempo setting is temporarily
disabled.
• The change in tempo is only temporary. If you
want to save the change in the arrangement’s
tempo, refer to “Creating Original Arrangements”
(p. 154)
The tempo can be set to any value from 25.0 to 250.0.
BR600_e2 143ページ 2006年4月17日 月曜日 午前9時3分