Rev0.10

115

Section 3

Mastering Tool Kit Parameter Functions

The Mastering Tool Kit's algorithms are composed from the following effects.

Equalizer
Bass Cut Filter
Enhancer
Input
Expander
Compressor
Mixer
Limiter
Output

On/Off OFF, ON

This parameter turns the equalizer effect on/off.

Input Gain -24 – +12 dB

Sets the overall volume before passing through the
equalizer.

Low Type SHELVG, PEAK

Sets the equalizer type (shelving, peaking) for the lower
range.

Low Gain -12 – +12 dB

Sets the amount of boost or cut in the lower range.

Low Freq 20 Hz – 2.0 kHz

Sets the center frequency for the lower range.

Low Q 0.3 – 16.0

Sets the steepness of the frequency response curve for the
lower range’s center frequency. (*1)

Low Mid Gain -12 – +12 dB

Sets the amount of boost or cut in the mid-low range.

Low Mid Freq 20 Hz – 8.0 kHz

Sets the center frequency for the mid-low range.

Low Mid Q 0.3 – 16.0

Sets the steepness of the frequency response curve for the
mid-low range’s center frequency.

High Mid Gain -12 – +12 dB

Sets the amount of boost or cut in the upper-low range.

High Mid Freq 20 Hz – 8.0 kHz

Sets the center frequency for the upper-midrange.

High Mid Q 0.3 – 16.0

Sets the steepness of the frequency response curve for the
upper-low range’s center frequency.

High Type SHELVG, PEAK

Sets the equalizer type (shelving, peaking) for the upper
range.

High Gain -12 – +12 dB

Sets the amount of boost or cut in the upper range.

High Freq 1.4 – 20.0 kHz

Sets the center frequency for the upper range.

High Q 0.3 – 16.0

Sets the frequency response curve steepness for the upper
range’s center frequency. (*1)

Output Gain -24 – +12 dB

Sets the overall volume level after equalization.
(*1)The Low Q/Hi Q setting is disabled when “SHELVG”
(shelving type equalization) is selected for the Low
Type or High Type.

Algorithm

=[EQ]=[BCUT]=[ENH]=[IN]=[EXP]
[COMP]=[MIX]=[LIM]=[OUT]

Parameter List

Equalizer

BR600_e2 115ページ 2006年4月17日 月曜日 午前9時3分