114
Mastering
Rev0.10
This assigns a name (patch name) to the edited patch
settings and saves the settings.
* If you do not need to change the patch name, go to Step 4
after entering the Mastering Tool Kit selection screen.
1
At the Mastering Tool Kit selection screen, press
CURSOR [ ] to move the cursor to “NAME,” and
press [ENTER].
The Patch Name Setting screen appears in the display.
fig.03-470
2
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to enter the patch name.
* Press [ENTER] to switch between uppercase and lowercase.
3
After you have completed entering the effect settings
and patch name as desired, press [EXIT] to return to
the Kit Selection screen.
4
Press CURSOR [ ] [ ] to move the cursor to
“WRITE,” and press [ENTER].
The Write screen appears in the display.
fig.03-480
5
Turn the TIME/VALUE dial to select the patch
number to which to write the new patch.
6
After you’ve selected the destination, press [ENTER].
After the save has been completed, you are returned to
the Mastering Tool Kit selection screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
Saving the Mastering Tool Kit Settings (Write)
You cannot write patches while songs are being
recorded or played back.
BR600_e2 114ページ ２００６年４月１７日　月曜日　午前９時３分