Rev0.10

75

Section 2

Editing the Performance on a Track (Track Edit)

The BR-600 allows you to edit your songs by performing
editing functions such as copying and moving data
recorded on the tracks. Track Copy allows you to copy a specific part of data and
then place it in a different location.
You can perform editing operations such as copying the
data on a track all at once, or copying the data from a
specified part as many times as you wish.
If, for example, you want to use a phrase from a certain
track, or have the same phrase repeated again and again,
the copy function will help save you time.
Perform the procedure given below to copy the portion
between specific times.

Ex. 1 : Copying twice to the same track

fig.02-160

Ex. 2 : Copying twice to another track

fig.02-170
About the Measure/
Time Specification screen
Measures and time are specified in the “S” (Start), “E”
(End), and “T” (To) screens in Track Edit as shown
below.
fig.02-080
BeatMeasure
S (Start) / E (End) / T (To)
Frame
Hours
Minutes
Seconds Sub Frame
(Ex.)
•The material edited with Track Edit is saved to the
song when you return to the Play screen. The
message "Keep power on!" appears in the lower
row of the display while the data is being
updated.
• To copy, move, or erase repeated portions, you
first need to set the portion to be repeated, using
the procedure described on p. 58.

Copying Data (Track Copy)

■

Copying by specifying the

time (TME/MES)
• If data exists at the position being copied to, that
data will be overwritten.
• The portion being copied must be longer than 1.0
seconds long. If the copied portion is 1.0 seconds
or less, no sound will be heard even if the copy is
carried out.
START END TO Time
Time
START END TO
BR600_e2 75 ページ ２００６年４月１７日　月曜日　午前９時３分