82

Editing the Performance on a Track (Track Edit)
Rev0.10

6

Press [ENTER].

fig.02-450

7

Use [CURSOR] and the TIME/VALUE dial to specify
the time of the beginning of the location “T” (To)
where you want the data to be moved.

8

When you are ready to execute the move, press
[ENTER].

The display will ask “Are you sure?,” so that you can
confirm the operation.

9

Press [ENTER].

Move Event is executed.

10

Press [UTILITY] (or press [EXIT] repeatedly) to
return to the Play screen.

* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.

Track Erase allows you to erase a specific part of data. Even
if data exists after the specified part, it will not be moved
forward to fill the gap left by the erasure. Like a normal
tape recorder, erasing can be considered covering
unwanted data by recording emptiness.
Perform the procedure given below to erase the portion
between specific times.

fig.02-500

1

Confirm that [PAD] is not lit, then press [UTILITY].

2

Press CURSOR [ ] [ ] to move the cursor to
“TRK,” and press [ENTER].

fig.02-510

Erasing Data (Track Erase)

■

Erasing by specifying the

time (TME/MES)
Do not leave a portion of less than 1.0 seconds in length
after the erased portion. If a portion that short does
remain, it will end up being silent.
START END Time
BR600_e2 82 ページ ２００６年４月１７日　月曜日　午前９時３分