176
With Windows
Rev0.10
11

Use the TIME/VALUE dial to select the WAV or AIFF file

you want to load as the drum sound, then press [ENTER].

12
Turn the TIME/VALUE dial to specify the load-
destination song drum kit.
S1–5 :
Song Drum Kit 1–5
fig.05-450
13
Turn the TIME/VALUE dial to select the load-
destination song drum sound, then press [ENTER].
The load is executed.
To cancel, press [EXIT].
fig.05-460
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
You can use the BR-600 to play BR-900CD, BR-864, or BR-
532 data.
* First be sure to back up the BR-900CD / BR-864 / BR-532’s
“ROLAND” folder to the computer.
1
Initializing the memory card on the BR-600 (p. 199).
2
Connect your computer and the BR-600 with a USB
cable.
3
Confirm that [PAD] is not lit, and with the recorder
stopped, press [UTILITY].
4
Press CURSOR [ ] [ ] to move the cursor to
“USB,” and press [ENTER].
The USB screen appears in the display.
5
Select “BACKUP” with the TIME/VALUE dial, then
press [ENTER].
The Idling screen appears in the display.
fig.05-470
* You cannot carry out the following procedure unless the
Idling screen is displayed. Refer to p. 214 for instructions on
resolving this problem.
The “BOSS_BR-600” (or “Removable disk (*:)”) icon is
added to the computer.
fig.05-060
You can preview the sound of the WAV or AIFF file to
be loaded by moving the cursor to “PVW” and
pressing [ENTER].
WAV and AIFF files in the TONELOAD folder are
retained without being deleted even after this
procedure is completed.
If these files are no longer needed, connect the BR-600
to your computer via USB and use the computer to
delete the files. Any files that are retained will use the
required amount of memory on the memory card.
Using the BR-900CD/BR-864/BR-532’s Data
BOSS_BR-600 Removable Disk (*:)
(Ex.)
BR600_e2 176ページ 2006年4月17日 月曜日 午前9時3分