Rev0.10

67

Section 1

L

oading Songs Created with the BR-900CD/BR-864/BR-532

You can load songs created with the BR-900CD, BR-864, or
BR-532 into the BR-600 via memory cards.
First, save the song data created with the BR-900CD or BR-
864 to a memory card, then insert the memory card into the
BR-600.

1

Confirm that [PAD] is not lit, then press [UTILITY].

2

Press CURSOR [ ] [ ] to move the cursor to
“SEL,” and press [ENTER].

The Song Select screen is appeared.

fig.01-330

3

Rotate the TIME/VALUE dial to select the song to be
loaded.

4

Press [ENTER].

The song data is loaded.
The song protect icon ( ) is indicated for the BR-
900CD/BR-864 songs.

Loading Songs Created with

the BR-900CD/BR-864

• Once you record, edit, or set parameters for
imported BR-864 song data, that particular song
data can no longer be used by the BR-864.
(The data can be used with the BR-900CD.)
To protect against accidental recording or editing,
song protect (p. 88) is automatically switched on
for imported BR-864 song data.
If you can accept the fact that you will no longer
be able to use the song data with the BR-864, you
can switch song protect off, then carry out
recording or editing.
When you turn off song protect, “Overwrite OK?”
appears in the display; press [ENTER] (YES). Song
protect is switched off, and the data is
simultaneously converted to BR-600 format.
• When the “Guitar Synth” algorithm is used with
the BR-864, an asterisk (“*”) is added before the
patch name, and the patch's algorithm and
parameter values will be the same as those in
“P01: JC Clean” in the GUITAR bank.
In addition, if “Harmonist
”
is used for the effect, the
“Flanger
”
effect is substituted for it. The patch
name is not changed.
BR600_e2 67 ページ ２００６年４月１７日　月曜日　午前９時３分