125
Fixing the Pitch of Vocals (Pitch Correction)
Rev0.10
Section 3
13
Press [PLAY].
Both [PLAY] and [REC] will light up and recording
will start.
The solo part will be played and any incorrect pitches
will be fixed. At the same time, the corrected part will
be recorded on the selected track.
14
Press [STOP] at the point where you want to stop recording.
The BR-600 will stop playback.
15
Press [ZERO] to jump to the start of the song once
again and then start playback of the recorded track.
Move the fader for the track containing the original
vocal part all the way down, and raise the fader for the
track containing the corrected vocal part to an
appropriate point. As you listen to the corrected part,
confirm whether or not you are happy with the
corrections.
If you do not like the way the vocal part was corrected,
use Undo (p. 64) to cancel the recording.
BR600_e2 125ページ ２００６年４月１７日　月曜日　午前９時３分