51
Putting multiple tracks together (Bounce)
Rev0.10
Quick Start
3
Press CURSOR [ ] [ ] until “FX Type” or “Type”
is displayed, then turn the TIME/VALUE dial to
select the loop effect.
When using CHO/DLY
Select from “CHORUS,” “DELAY,” or “DBLN”
(doubling).
fig.00-660
When using REV
Select from “HALL” or “ROOM.”
fig.00-670
4
If you want to change the settings for the selected
effect, press CURSOR [ ] [ ] to select the
parameter, then change the setting’s value with the
TIME/VALUE dial.
fig.00-680
For more on the settings content, refer to “Loop
Effect Parameter Functions” (p. 120).
5
Press CURSOR [ ] [ ] to display the Send Level
settings screen.
When using CHO/DLY
fig.00-690
When using REV
fig.00-700
6
Press CURSOR [ ] [ ] and the TIME/VALUE dial
to adjust each track’s send level.
* Pressing a REC TRACK button moves the cursor to the
track corresponding to the button pressed.
7
After you have completed adjusting the send level,
press [EXIT] repeatedly to return to the Play screen
You cannot use chorus, delay, and doubling
simultaneously. Any one may be selected while loop
effects are in use.
The “send level” is the volume level of the signal sent
from each respective track to each effect, and you can
change the amount of effect applied by adjusting the
send level.
BR600_e2 51 ページ ２００６年４月１７日　月曜日　午前９時３分