Rev0.10

35

Quick Start

Preparing Songs For Recording

When the memory card contains more than one song, the
song that was recorded last is automatically selected.
To record a new song, follow the procedure given below.

fig.00-250

1

Confirm that [PAD] is not lit, then press [UTILITY].

2

Press CURSOR [ ] [ ] to move the cursor to
“NEW,” and press [ENTER].

“Type” appears in the display.

fig.00-260

3

Turn the TIME/VALUE dial to select the desired data type.

Ordinarily, you should select the data type that meets
your needs for a particular recording situation, while
considering the desired quality and recording time.

However, for our purposes here, you can select HiFi (MT2).

For more about data types, refer to“Recording”
(p. 54).

4

Press [ENTER].

“Are you sure?” appears in the display.

fig.00-270

5

Press [ENTER].

When the new song is ready, you are returned to the
Play screen.

* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.

■

Recording a new song

(Song New)

1

2,4,5

3

2
The BR-600 uses a sample rate of 44.1 kHz. It is not
possible to change the sample rate.
BR600_e2 35 ページ ２００６年４月１７日　月曜日　午前９時３分