Roland VC-1 D-50 owner manual LFO Low Frequency Oscillator, Pitch Mod Pitch Modulation

Tone Parameters

*The maximum variable range of each level will depend on the Velocity Range in P-ENV. (p. 51)

Velocity Range	Level	Range
0	+50	+1 octave
	-50	-1 octave
1	+50	+1.5 octave
	-50	-1.5 octave
2	+50	+2 octave
	-50	-2 octave

Pitch Mod (Pitch Modulation)

Depending on how the LFO in WG modulation (p. 60) is set, the vibrato set here may have no effect at all.

LFOD (LFO Depth)

Sets the depth of LFO-1, that controls the WG pitch. Higher values deepen the effect.

Value: 0–100

Lever (Pitch Lever Modulation)

Sets the sensitivity of the vibrato depth controlled by the bender lever. Higher values deepen the effect.

Value: 0–100

After (Pitch Aftertouch Modulation)

This sets the sensitivity of the vibrato depth controlled by aftertouch. Higher values deepen the vibrato effect. Value: 0–100

LFO (Low Frequency Oscillator)

The parameters of LFO-2 and LFO-3 can be set like LFO-1, except for a few parameters.

Wave (LFO Waveform)

Selects the waveform of the LFO.

Value: TRI, SAW, SQU, RND

Display Waveform

TRI (Triangle)

SAW (Sawtooth)

SQU (Square)

RND (Random) Waveform changes randomly.

Rate (LFO Rate)

Sets the rate (frequency) of the LFO. Higher values quicken the rate.

Value: 0–100

53