Roland VC-1 D-50 owner manual TVA ENV Level, T4 Time

Tone Parameters

T4 (Time 4

Sets the time needed to reach point 4 from point 3.

Value: 0–100

T5 (Time 5)

Sets the time needed to reach point 5 from the moment the key is released.

Value: 0–100

TVA ENV Level

L1 (Level 1)

Sets the level of point 1.

Value: 0–100

L2 (Level 2)

Sets the level of point 2.

Value: 0–100

L3 (Level 3)

Sets the level of point 3.

Value: 0–100

SusL (Sustain Level)

Sets the level of point 4.

Value: 0–100

EndL (End Level)

To lower the level after releasing the key, set this to 0, and to raise the level, set it to 100. Value: 0, 100

*The End Level remains until the key is released and played again. That is, at a value of 100, the sound remains. However, the PMC Sound Generator’s One-shot sounds do not remain even when set to 100.

*If the levels of two adjacent points are set to similar values, the time between these two points may prove to be shorter than what is actually set, or even zero.

68