Roland VC-1 D-50 Assigning Parameters to the Controllers, Controllers Parameters, Keys Functions

Applying Effects to the Sound

Assigning Parameters to the Controllers

You can assign a variety of patch factors (p. 81), tone parameters (p. 82), and other settings to the V-Synth XT’s complement of controller sections. This is referred to as the Control Setup. With intuitive editing of sound sources with the knobs, you can use the D-50 in ways that go way beyond the original instrument.

Controllers	Parameters
	Patch Factor (p. 81)
E1–E8 knobs	Tone Parameters (p. 82)
	Partial Parameters (p. 83)

1.Access the PATCH TOP Screen.

2.Touch in the lower left of the screen. The CTRL SETUP window appears.

3.When editing a parameter that requires you to specify a value, move the cursor to the value box of that parameter. Then modify the value by either turning the VALUE dial or pressing [INC/+] or [DEC/-].

Parameters marked by can be controlled by specific CTRL Setup. For details on each parameter, refer to the corresponding reference page.

The on-screen keys have the following functions.

Keys

Functions

Displays the parameters to be assigned as a list.

Returns to the screen.

Restores the assigned parameters to their original factory condition.

16