Copying a Reverb Type | Roland VC-1 D-50 manual

Transferring Patches To and From the D-50/550

10.Touch <OK>. The bulk dump starts. If you want to cancel without executing, touch <Cancel>.

11.When the data transfer is completed, the D-50’s display shows “Complete.”

12.Press the [EXIT] button on the D-50 to return to the play mode.

Copying a Reverb Type

In addition to the patches (64 patches), 16 reverb types (17–32are also saved to the VC-1’s patch banks (Pre 1–6, Int 1–8). Different reverb types 17–32are saved to each patch bank. The reverb types you can use vary with the selected patch as described below.

•All shared common reverb types (1–16) can be used.

•The reverb types 17–32in individual banks can be used only with the patches (64 patches) contained in that bank.

•Reverb types from a bank other than the internal banks (any from 1 through 32) can be copied to a reverb type in the internal banks (any from 17 through 32).

•This is convenient when, for example, you want to use Reverb Type 25 (Gate Reverb) from the Patch Bank Pre 1 as Reverb Type 30 in the Patch Bank Int 1.

Common

Reverb Type

(NOT rewritable)

1 2 3 4

5 6 7 8

910 11 12

13 14 15 16

Preset Bank

Internal Bank

*Reverb Types (17–32) are transferred simultaneously with patch data when patch data is transferred from the D-50 to the VC-1 (bulk loaded) or from the VC-1 to the D-50 (bulk dumped).

1.Press [MODE] on the VC-1. The MODE MENU window appears.

2.Touch <DATA TRANSFER>. The DATA TRANSFER screen appears.

Pre1

Reverb Type

(NOT rewritable)

17 18 19 20

21 22 23 24

25 26 27 28

29 30 31 32

Int1

Reverb Type

(rewritable)

17 18 19 20

21 22 23 24

25 26 27 28

29 30 31 32

35

Image 35

Roland VC-1 D-50 owner manual Copying a Reverb Type

Contents

03897845 ’05-3-1N Page Page Table of Contents Table of Contents Editing and Performances That Surpass the Original Main FeaturesIntroduction Perfect Simulation of the D-50’s Tones What is the digital synthesizer D-50? Number KEY Panel DescriptionsFront Panel Exit ModeShift Rear Panel Try Out the Sounds Turning On the Power Selecting Patches and Playing Sounds Selecting Patches with Patch Palette Selecting Patches with the Value dialSelecting Patches from the List Enabling or Disabling the Beep Tone Viewing Various Information 01ePatchFactorImage Applying Effects to the Sound Keys Functions Assigning Parameters to the ControllersControllers Parameters List OSC1, OSC2, COSM1, COSM2 and TVA Specify the Tones or the Partials to be applied You can control the following parameters Settings Common to All Screens How to Make the Patch Factors SEP WholeDual Split Value AfterPB Aftertouch, Pitch Bender Hold Hold ModeMode Portamento Mode Bend Bender Range Value Display Function Output Output ModeMode Output Mode Revbal Reverb Balance Vol Total VolumeRevType Reverb Type Value Display Description Value Time Chase Time Mode Chase ModeULL ULU Level Chase Level SepCH Receive Channel in Separate Mode LTune Fine Tuning of the Lower ToneUTune Fine Tuning of the Upper Tone TxBS Transmit Bank Select Switch Naming a Patch Saving Patches You’ve Created Saving Patches VC-1’s File Structure Reset to Default Factory SettingsTouch Factory RESET. The Factory Reset screen appears Transferring Patches from the D-50 to the VC-1 Transferring Patches To and From the D-50/550 Transfer the patch from the memory card to the D-50/550 Using the D-50Using the D-550 Transferring Patches from the D-50/550 to the VC-1 Destination Bank Saving Transferred PatchesTouch Data TRANSFER. The Data Transfer screen appears DEC Source Bank INC/+ or DEC Source Bank Transferring Patches from the VC-1 to the D-50/550Touch System 3-1 Copying a Reverb Type Value 17 Value1 Destination Bank Temporary Area Overview of the VC-1Memory Structure Work Area Synthesizer sound generator Basic Concept of a TonePartial Tone PCM sound generatorStructure Patch Ring Modulator WG Wave Generator Structure of Tone Parameters LFO Low Frequency TVF Time Variant FilterTVA Time Variant Amplifier ENV Envelope Generator Creating a Patch How to Make the Patch Settings Cursor Buttons Useful Functions for EditingEditing a Value Undoing an editing Operation Silencing the Sound of the Partial Editing with the Panel Controls Partial Select Display Value Copying Tone SettingsCancel TVF Copying Parameter SettingsALL Common Auditioning the Sound Before Editing When Is set to All or Common Setting is ignored Patch Factor Initializing Patch SettingsCtrl Setup Check All EQ/CHORUS Tone ParametersCommon Parameters Structure Velo Velocity Range ENV Pitch EnvelopeENV Edit Envelope ENV Time Edit ENV Level Edit Pitch Mod Pitch Modulation LFO Low Frequency Oscillator KEY EQ/CHORUS Equalizer/ChorusEQ Edit Equalizer OFF Chorus Edit Pitch Partial Parameters Wave Waveform WG Form WG WaveformWG Form Waveform WG PW WG Pulse Width Value -7-+7 LFO LFO Select Display LFO PhaseValue -7-+7 After Aftertouch Range KF Keyfollow pitch WG PitchCoars Pitch Coarse Value C1-C7 Fine Pitch Fine WG Mod WG Modulation LFO LFO ModeENV P-ENV Mode Bend Bender Mode Freq Cutoff Frequency Bender Mode ExampleTVF Time Variant Filter Display Example Example Function Reso ResonanceKFKeyfollow Cutoff Point BP Bias Point TVF ENV TVF Envelope Value T5 Time TVF ENV Time TVF ENV Level Display Example Function Example Value Volume AdjustmentTVA Time Variant Amplifier Value -50-+50 BP Bias Point Velo Velocity Follow Time TVA ENV EnvelopeTVA ENV Time TVA ENV Level Value -7-+7 MOD Modulation TVA MOD DEC Settings for the Entire VC-1How to Make the System Function Settings Digital Freq Digital Frequency Sound SettingMaster Tune Sound Character Value 1 SeparateCH Receive Channel in Separate ModeProg.C Program Change Switch Midi CH Midi Channel TxEDIT Exclusive Exclusive SwitchBank.S Bank Select Switch Dump Initializing the System Settings Mono Mode, Poly Mode Key Mode Alteration Split Key Mode Poly Mode Mono Mode Mode Message OffDual Dual-S Sound List Preset PatchesP1 Preset 1Original D-50 P2 Preset 2 New P4 Preset 4PN-D50-02 P3 Preset 3PN-D50-01 BANK1 P5 Preset 5PN-D50-03P6 Preset 6PN-D50-04 Patch Factors Value Comment Patch Factors Parameter Value Tone ParametersCommon Parameters Parameter Value Comment Partial Parameters TVF ENV Midich System Parameters Number Display PCM Name WaveformOneshot Loop Number Display Loop Some of the sounds 1 to 76, are combined and loopedNewly Added Waveforms Data Transmission Midi Implementation Receive data Mono Controller number Exclusive Communication Partial Parameter Common Parameter Patch Parameter Supplementary Material Midi Implementation Chart VC-1 V-Card D-50 Specifications Index Index 100