Tone Parameters
TVF ENV Level
L1 (Level 1) 
Sets the of point 1.
Value:
L2 (Level 2) 
Sets the level of point 2.
Value:
L3 (Level 3) 
Sets the level of point 3.
Value:
SusL (Sustain Level) 
This sets the level of point 4.
Value: 0–100
EndL (End Level) 
To lower the level after releasing the key, set this to 0, and to raise the level, set it to 100.
Value: 0, 100
*The End Level is retained until you release and play the key again.
*If the Levels of two adjacent points are set to similar values, the time between these two points may prove to be shorter than what is actually set, or even zero.
65
