Runco CL-610 manual Connecting 12-volt, Trigger Output to External, Theater Equipment

Installation

Connecting 12-volt ➤	If your home theater contains a retractable screen, screen mask or other 12-volt
Trigger Output to External	trigger-activated equipment, use the cable supplied with the CL-610 to connect it to the
Theater Equipment	12-volt trigger output as shown in Figure 3-9.

S-VID /

VID-S

3.5-mm mini plug

to other,
12-volt	Black = Ground (Sleeve)
trigger-activated equipment
	Red = +12V (Tip)
(screen, screen mask etc.)

Figure 3-9. Connecting the 12-Volt Trigger Output to Other Equipment

Connecting to AC Power ➤ The CL-610 ships with various types of AC power cords. Choose the one that is appropriate to your locale.

Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V). Then, connect the other end to your AC power source.

Power switch

24 Runco CL-610 Series Owner’s Operating Manual