Controls and Functions
2.3
CL-610 Connector Panel
3.LAMP LED
Indicates lamp status as follows:
•Off during normal operation
•Red when the lamp has exceeded its usage life or developed a problem
•Flashes red when the fans are not working or the lamp cover is open
4.POWER/STANDBY LED Indicates power status as follows:
•Orange when the projector is in standby mode
•Flashes orange for 45 seconds after the projector is turned on to indicate that the lamp is warming up
•Green during normal operation
•Flashes green for 110 seconds after the projector is turned off to indicate that the lamp is cooling down
5.TEMP LED
Indicates fan status and internal temperature as follows:
•Off during normal operation
•Red when internal temperature is too high
•Flashes red when the fans are not working or the lamp cover is open
Figure 2-4 shows the CL-610 connector panel.
Figure 2-4. CL-610 Connector Panel
8 | Runco |