Runco manual Mounting the CL-610

Installation

Other Considerations ➤

3.4

Mounting the CL-610

Floor Mounting (Upright) ➤

Other considerations and tips that can help improve your installation:

•Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away from heating and/or air conditioning vents. Changes in temperature may cause drifts in the projector circuitry, which may affect performance.

•Keep the projector away from devices that radiate electromagnetic energy such as motors and transformers. Common sources of these include slide projectors, speakers, power amplifiers and elevators.

There are several methods for mounting the projector. Depending on your chosen installation, one method may be more suitable than another.

In typical front and rear screen installations, the projector can be placed upright on a secure and level surface such as a table or cart. Carts are useful when moving a projector during a presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it from being moved during a presentation.

Ceiling Mounting ➤	For fixed installations, and for those that want the projector out of sight or have a limited
(Inverted)	space for projector and audience, you can invert the CL-610 and suspend it from the
	ceiling using a specially-designed ceiling mount fixture.
	Caution	Use only the Runco-approved ceiling mount kit designed for your
		projector. Install the mount kit according to the instructions
		provided with it.
	The projector can also be inverted and placed in an enclosure above and behind the
	viewing area. Install four feet on the inside bottom surface of the enclosure on which the
	projector can rest. A variety of materials can be used for this purpose (for example, rubber
	crutch tips or turntable feet).
Adjusting the Projector ➤	If the screen is significantly higher or lower than the projector, you can also tilt the
Height or Projection Angle	projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling

mount.

For a floor installation, turn the four adjustable feet on the bottom of the projector to adjust the projector height and/or projection angle.

If you do this, you may need to make keystone adjustments or vertically shift the image using the on-screen display (OSD) controls, to compensate. For detailed instructions, refer to Using the On-Screen Menus on page 30.

18 Runco CL-610 Series Owner’s Operating Manual