Runco CL-610 manual Main Menu, Enter or, Picture Adjustment

Operation

		Main Menu ➤	The Main Menu is the starting point for accessing all projector functions.
			(The Set Up and ISF Calibration menus are hidden and not accessible until you enter a
		Runco CL-610
			passcode.)
>		Video
			The active source is indicated by an arrow (>) to its left; in the example at left, Video is the
		S-Video
		Component1	active source. To select a different source, use the or button to highlight it and press
			ENTER or .
		Component2
		RGB-HD
		HDMI
- - - - - - - - - - - - - - - - -
		Aspect Ratio
		Installation
		Option
		Set Up
		ISF Calibration
		Picture Adjustment ➤	Use the controls in the Adjustment Menu to calibrate your CL-610 for optimum picture
			quality. To access the Adjustment menu, press MENU, highlight the active source and
		Adjustment	press ENTER or .
	Brightness		To adjust a setting, use the or button to highlight it and press ENTER. Use the
	Contrast		or button to change the setting. When finished, press EXIT.
	Color		The CL-610 has been designed to incorporate setup and calibration standards
	Tint
			established by the Imaging Science Foundation (ISF). The ISF has developed carefully
	Sharpness
			crafted, industry-recognized standards for optimal video performance and has
	Filter
			implemented a training program for technicians and installers to use these standards to
	Color Temperature		obtain optimal picture quality from Runco video display devices. Accordingly, Runco
	ICC Selection		recommends that setup and calibration be performed by an ISF certified installation
	Store Image Settings		technician.
	Restore Image Settings		All signal types require separate processing. Therefore, you need to calibrate each input
			separately.	When you change a picture quality setting, save the change to a
			Note
				preset afterwards. Otherwise, the change will be lost when a

different input is selected. (Picture quality settings are saved for each input and resolution separately.) For information about saving settings, refer to Store Image Settings on page 37.

32 Runco CL-610 Series Owner’s Operating Manual