Runco CL-610 manual RS-232 Controller, Connection

Installation

Connect a PC or home theater control/automation system (if present) to the RS-232 port	RS-232 Controller
on the CL-610; see Figure 3-8.Use a standard, 4-wire RJ-11 telephone cable, wired	Connection
straight-through.
For more information about using this connection, refer to Serial Communications on
page 53.

RJ-11 Male

1

2

3

4

RJ-11 to D-Sub 9-pin Adapter (not included)

Yellow	Yellow
Green	Green

		5	4	3	2	1
	Black	9	8		7	6
Black
	Red
Red		D-Sub 9-pin female

RS-232 Adapter Wiring

D-Sub 9-pin female	4-pin RJ-11	Function
2	2	Transmit Data
3	3	Receive Data
5	1, 4	Ground
1, 4, 6, 7, 8, 9	--	Not Connected

Figure 3-8. RS-232 Control System Connection

Runco CL-610 Series Owner’s Operating Manual 23