Runco runco super hdtv dtv video projector, dtv-992/992 ultra manual IR Transmission Indicator

LOCATION AND FUNCTION OF CONTROLS

1

18 17 16

F5 EXIT

F4

F3

F2

F1 ADJ

2

	14		12
15		13		11

ENT ll

TEXT - PHASE +

*
PAUSE	?

3	4		6
		5

10

- SHARPN +	- TINT +	- COLOR +	- BRIGHTN +	- CONTR +	BALANCE +	- VOL +
					-
0	8	6	4	2	TREBLE +	- BASS +
9	7	5	3	1	-

7 8 9

1IR Transmission Indicator

2ADJ. : Adjust key, to enter or exit the adjustment mode.

3Address key (recessed key) : to enter the address of the projec- tor (between 0 and 9). Press the address key, followed by press- ing one digit button between 0 and 9. When addressed to O , the remote will talk to any projector, regardless of its address.

4STBY : Stand by button:

-To initiate remote power up operation

-To stop projection without main power off.

5Pause : To mute the image, press PAUSE. The image disappears but full power is retained for immediate restarting.

6Mute : Not used

7Help : Not used.

8Digit buttons : Direct aspect ratio selection.

9Sound controls : Not used.

10Picture controls : Use these buttons to obtain the desired level (see also ‘Controlling’) for each picture function.

11Phase : Not used.

12Text : When adjusting one of the image controls during a meet- ing, the displayed bar scale can be removed by pressing ‘TEXT’ key first. To re-display the bar scale on the screen, press ‘TEXT’ key again. ‘TEXT’ key is only active in operational mode. When ‘TEXT’ is off, no warning message will be dis

played.

13FREEZ : Not used.

stand-bycolor

pause / park	brightness
sharpness	contrast

tint

14For Future Use

15ENTER : To start up the adjustment mode or to confirm an adjustment or selection in the adjustment mode.

16Control disc : To make menu selections when in the adjustment mode. Also allows to increment or decrement an adjustment in

the adjustment mode.

Control disc up = up arrow in the menus Control disc down = down arrow in the menus

Control disc to the right = arrow to the right on the menus Control disc to the left = arrow to the left on the menus

17EXIT : To leave the adjustment mode or to scroll upwards when in the adjustment mode.

18For Future Use

2-3