Runco dtv-992/992 ultra, runco super hdtv dtv video projector Touch-Up, Align on Current Source

Appendix 2

TOUCH-UP

When TOUCH-UP is selected, only the static convergence of the currently selected source will be carried out automatical- ly. Follow the steps below to select:

Highlight TOUCH-UP by pushing up or down keys of the control disc;

Press the <ENTER> button to start up the static conver- gence.

If the process is successfully completed, the projector will return to image display of the current source.

ALIGN ON CURRENT SOURCE

When ALIGN is selected, the automatic convergence on the current memory bank will be carried out automatically, start- ing from the existing settings.

By projecting alternately red and blue line, 25 convergence areas are aligned to the green pattern.

Follow the steps below to select:

Highlight ALIGN below ON CURRENT SOURCE by pushing up or down keys of the control disc;

Press the <ENTER> button to start up the automatic convergence of the entire screen.

If the process is successfully completed, the projector will return to image display of the current source.

Use this option when the convergence is close to proper alignment.

ALIGN FROM MIDPOSITION ON CURRENT SOURCE

When ALIGN FROM MIDPOSITION is selected, the auto- matic convergence on the current source will be carried out automatically, but starting from the mid-position settings.

By projecting alternately red and blue lines, 25 convergence areas are aligned to the green pattern.

Follow the steps below to select:

Highlight ALIGN FROM MIDPOSITION by pushing up or down keys of the control disc;

ADJUSTMENT MODE
Select a path from below:
EYE-Q
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
	Source 1
Select with	or
then <ENTER>.		EYE-Q
<EXIT> to return
		TOUCH UP
		AUTOCONVERGENCE
		QUICK AUTOPICTURE
		FULL AUTOPICTURE
		EYE-Q SETUP
		EYE-Q DIAGNOSTICS
		Select with	or
		then <ENTER>.
		<EXIT> to return

EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with	or
then <ENTER>.		AUTOCONVERGENCE
<EXIT> to return
		ON CURRENT SOURCE:
		ALIGN
		ALIGN FROM MIDPOSITION
		ON ALL SOURCES: (XX)
		TOUCH-UP
		ALIGN
		ALIGN FROM MIDPOSITION
		STATUS:
		ready
		Select with	or
		then <ENTER>.
		<EXIT> to return

EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with	or
then <ENTER>.
<EXIT> to return

AUTOCONVERGENCE
ON CURRENT SOURCE:
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES: (XX)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
STATUS:
ready
Select with	or
then <ENTER>.
<EXIT> to return

Press the <ENTER> button to start up the automatic convergence of the entire screen.

If the process is successfully completed, the projector will return to image display of the current source.

Use this option when the convergence is far from proper alignment.

APX-11