5-2
Start Up of the Adjustment Mode
RANDOM ACCESS - Random Access should be selected if the user intends to
make only a few adjustments.
SERVICE - Service should be selected if the user intends to delete blocks,
change password or apply information.
EYE-Q - This selection will only be available when the subconvergence unit
EYE-Q is connected to the projector.
While in Guided or Random Access adjustment Mode, the user may use an
external source, an internally generated genlocked pattern or an internally gen-
erated multifrequency cross hatch pattern as a setup pattern. Some items in the
Adjustment mode are password protected. While selecting such an item, the
projector asks you to enter your password. (Password protection is only avail-
able when the password DIP switch on the controller module is in the ON posi-
tion. Contact a RUNCO authorized technician when no password is requested
during the adjustment procedure and password protection is desired.)
Your password contains 4 digits.
a) Adjusting the projector with the RCU.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a ‘X’ appears on the screen under the displayed text
‘enter password’
When your password is correct, you get access to the ‘Adjustment mode’. When
the entered password is wrong, the message ‘Wrong password !!!’ will be dis-
played. The projector stays on the previous selected item.
Factory programmed
password : 0000
b) adjusting the projector with the local keypad.
When the ‘compose password’ menu is displayed, select with control disc the
first digit of your password and press ENTER. Continue by selecting the second
digit with the control disc and press ENTER. Handle in the same way for the
third and fourth digit.
When your password is correct, you get access to the ‘Adjustment mode’.
When the entered password is wrong, the message ‘Wrong password’ will be
displayed.
Once the password is correctly entered, all other password protected items are
accessible without re-entering your password.
When re-entering the adjustment mode, it will be necessary to enter your pass-
word again when selecting a password protected item.
enter
password
X X X X
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
EYE-Q
Source 1
Select with
then <ENTER>
<EXIT> to return
or
wrong
password
COMPOSE
PASSWORD
???
7 8 9
4 5 6
1 2 3
0
Select with
then <ENTER>
<EXIT> to return
or
,