Service Mode
All settings to midposition
Item is password protected.
Highlight ‘All settings to midposition’ with the control disc and press ENTER to set all settings to their midposition.
A confirmation menu will be displayed first.
ENTER displays a Confirmation screen.
EXIT returns to the Service menu.
ENTER will set all settings to their midposition. EXIT cancel the operation to set all settings to their midposition.
Undo all settings to midpos
When “all settings to midpos” is selected, all settings are set to their mid- position. To cancel this action, select ‘Undo all settings to midpos’ by push- ing the control disc up or down and press ENTER. ‘Undo all settings to Midposition’ is displayed in the Memory management menu instead of ‘All settings to midposition’ when this latter is pressed.
An undo is possible as long as the projector is playing on the same source (= same adjustment block) even when some adjustments as geometry or convergence are already readjusted. When undo is pressed all settings are reset to the previous settings.
R & B convergence mid
Item is password protected.
Highlight ‘R & B convergence mid’ with the control disc and press ENTER to set all convergence settings to their midposition. A confirmation screen will be displayed first.
ENTER sets the convergence settings to their midposition. EXIT cancels the procedure to set the convergence settings to their midposition.
Undo R & B convergence mid
When “R & B convergence mid” is selected, all convergence settings are set to their midposition. To cancel this action, select ‘Undo R & B conver- gence mid’ by pushing the control disc up or down and press ENTER. ‘Undo R & B convergence mid’ is displayed in the Memory management menu instead of ‘R & B convergence mid’ when this latter is pressed.
An undo is possible as long as the projector is playing on the same source (= same adjustment block) even when some adjustments are already read- justed. When undo is pressed all settings are reset to the previous settings.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
SET TO MIDPOSITION |
All settings
on current block will be overwritten !
<ENTER> to confirm <EXIT> to cancel
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with 
or 
then <ENTER> <EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
R & B CONVERGENCE MID |
Convergence settings |
in current block |
will be overwritten ! |
<ENTER> to confirm |
<EXIT> to cancel |
