Runco dtv-992/992 ultra manual Change password, Change Language, Total Run Time

Service Mode

Change password

This item is password protected.

Highlight ‘Change Password’ with the control disc and press

ENTER.

ENTER gives a confirmation message before deleting. EXIT returns to the Path Selection main menu.

The current password is displayed. The new password must consist of 4 digits between 0 and 9. Push the control disc to the left or to the right to select the digits to be changed. Use the numeric keys to enter the new digits.

Press ENTER to save the new password. Before saving the new password, a confirmation screen will be displayed.

Press EXIT to return to the Projector Set-up menu without saving the new password.

When the displayed password is correct, press ENTER to save. If not correct, press EXIT to cancel the saving.

ENTER saves the entered password.

EXIT returns without saving.

Change Language

The ‘Change Language’ function offers the possibility to change the language of the screen menus to :

-English

-Spanish

-French

-German

Highlight ‘Change Language’ with the control disc and press

ENTER saves the entered password.

EXIT returns without saving.

ENTER.

Push the control disc up or down to select the desired language and press ENTER to change the language.

Total Run Time

Highlight ‘Total Run Time’ with the control disc and press ENTER to display the amount of time the projector has played since its first start up at the factory.

ENTER gives the selected item.

EXIT returns to Service mode menu.

ADJUST returns to the Operational mode.

Note : all projectors leave the factory after a burn-in period of approximately 100 hours.

PROJECTOR SET-UP

IDENTIFICATION

TOTAL RUN TIME

CHANGE PASSWORD

CHANGE LANGUAGE

CHANGE PROJECTOR ADDRESS

CHANGE BAUDRATE

CHANGE PASSWORD

Enter new password :

0 0 0 0

CHANGE PASSWORD

Password will be

reprogrammed as XXXX

<ENTER> to confirm <EXIT> to cancel

PROJECTOR SET-UP

IDENTIFICATION

TOTAL RUN TIME

CHANGE PASSWORD

CHANGE LANGUAGE

CHANGE PROJECTOR ADDRESS

LANGUAGE

ENGLISH

~

ESPANOL

FRANCAIS

DEUTSCH

Select with or then <ENTER> <EXIT> to return.

PROJECTOR SET-UP

IDENTIFICATION

TOTAL RUN TIME

CHANGE PASSWORD

CHANGE LANGUAGE

CHANGE PROJECTOR ADDRESS

CHANGE BAUDRATE

POWER UP MODE: operating

Select with or then <ENTER> <EXIT> to return.

7-4