Wired Network
Wired - Automatic
1.In the Home screen, select Settings, and then press the E button.
2.Select Network, and then press the E button.
3.Select Network Settings, and then press the E button.
4.Select Wired in the Network Settings screen, and then press the E button.
5.Select Connect, and then press the E button. The product detects the wired connection, verifies the network connection and then connects to the network.
Wired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 2 in Wired Network, and then follow these steps:
1.Select Network Status. The player searches for a network, and then displays the connection failed message.
2.On the bottom of the screen, select IP Settings, and then press the E button. The IP Settings screen appears.
3.Select the IP Setting field, and then press the E button.
4.Select Enter manually in the IP Setting field, and then press the E button.
5.Select a value to enter (IP Address, for example), and then press the E button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button.
6.Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 5.
7.Repeat Steps 5 and 6 until you have filled in all values.
"" You can get the Network values from your Internet provider.
8.When finished entering all the values, select OK, and then press the E button. The player verifies the network connection and then connects to the network.
