Manual Tuning Try Now
Scans for a channel manually and stores in the product.
When scanning has finished, channels are updated in the channel list.
Transfer Channel list Try Now
This function can import or export the channel map.
You should connect a USB storage to use this function.
●●Import from USB : Import channel list from USB.
●●Export to USB : Export channel list to USB.
"" If you set the country to Netherlands and Antenna source set to cable, this menu will not appear.
Delete CAM operator profile Except for F8900A, F8500A model
Select this menu to delete the CAM operator profile.
Satellite System For F8909S, F8509S, F6909S model
Configure settings for your satellite equipment.
●●Satellite Selection : Choose one or more satelites for your product.
●●LNB Power : Enable or disable LNB Power supply from receiver.
●●LNB Settings : Configure parameters for your satelite equipment. ●●SatCR/Unicable Settings :Configure single cable installation.
"" Depending on your country, this menu function may not be supported.
●●Positioner Settings : Configure the settings for your aerial positioner.
●●Reset All Settings : Restrore all settings to defaults.
