Samsung DCS KEYSET manual Programmed Messages, Messages 11-20 are blank for new messages

Samsung DCS Keyset User Guide

Note:

•You can first view message indications and return them in the order you choose. See Viewing Message Indications under Display Features.

•If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling.

•If a message has been left at your keyset by a keyset in Auto Answer mode, you must manually cancel the message after it has been returned.

Programmed Messages

When you plan to be away from your phone for any length of time, you can leave a programmed station message on your phone’s display (e.g. In a Meeting). Display keysets calling you will also see this message. The message may also contain instructions for callers to follow. There are 20 possible messages (01–20). Messages 01–10 are set up by default as follows:

01.IN A MEETING

02.OUT ON A CALL

03.OUT TO LUNCH

04.LEAVE A MESSAGE

05.PAGE ME

06.OUT OF TOWN

07.IN TOMORROW

08.RETURN AFTERNOON

09.ON VACATION

10.GONE HOME

Messages 11–20 are blank for new messages.

Note:

All programmed messages (01–20) can be changed by reprogramming the system. Therefore, some or all of the messages shown above may be different on your sys- tem. To find out what your messages are, follow the procedure below. If necessary, ask your system administrator to set up specific messages you might require.

– 38 –