Samsung DCS KEYSET manual Press the Trsf key to store the data and exit programming

1.While on-hook, press the TRSF key and dial 107.

2.Use the VOLUME keys to scroll through your programmable keys.

When the key you require is displayed, press the right soft key.

OR

3.Press the programmable key to which you want to add an ex- tender.

4.Enter the key extender. The following table shows the keys which can be assigned extenders, and the range of values allowed for each key according to system type.

KEY	NAME		EXTENDER
		DCS	CII	816	408/i*
BOSS	Boss and Secretary	1–4	1–4	1–4	1–2
DIR	Directory	PERS (1), SYS (2) or STN (3)
DP	Direct Pickup	Station or station group number
DS	Direct Station Selection	Station or station group number
FWRD	Call Forward	0–5	0–5	0–5	0–5
GPIK	Group Pickup	01–20	01–20	01–08	01–04
IG	In/Out of Group	501–529	501–519	500–509	50–53
MMPG	Meet Me Page	0–9, *	0–9, *	0–4, 5, *	0–2, 5, *
PAGE	Page	0–9, *	0–9, *	0–4, 5, *	0–2, 5, *
PMSG	Programmable Message	01–20	01–20	01–20	01– 20
SP	UCD Supervise	UCD group number
SPD	Speed Dial: Personal	00–49,	00–49,	00–49,	00–49,
	System	500–999	500–999	500–799	500–699
VT	VM Transfer	VM/AA	group number

*408 and 408i

5.Press the TRSF key to store the data and exit programming.

Note: Make sure that the cursor is placed correctly before you enter the extender.

– 57 –