Samsung DCS KEYSET manual Customising Your Keyset, Select Ring Tone, Change Your Passcode

Samsung DCS Keyset User Guide

Customising Your Keyset

Select Ring Tone

You can select one of eight ring tones for your keyset.

1.While on-hook, press the TRSF key and dial 111.

2.Dial a number 1–8or press the VOLUME Up and Down keys to hear each tone.

3.When you hear the tone that you want, press the TRSF key.

Change Your Passcode

By default, your extension passcode is 1234. You can change this passcode to any 4-digit number.

1.While on-hook, press the TRSF key and dial 101.

2.Dial your existing (old) passcode.

3.Dial a new passcode (must be four characters, e.g. 3456). You can use numbers 0–9.

4.Redial the new passcode to verify. If successful, you will hear two beeps. (Four beeps indicate an invalid code and you should enter the code again.)

5.Press the TRSF key to store the new passcode.

Set Answer Mode

You can receive internal calls in one of three modes: Ringing, Auto Answer or Voice Announce (see Answering Internal Calls in the sec- tion ‘Internal Calls’ for details):

1.While on-hook, press the TRSF key and dial 103.

2.Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce. (Or use the VOLUME Up/Down keys to select.)

3.Press the TRSF key to store your selection.

–48 –