Automatic Hold
While on an outside call, pressing a line key, route key or a flashing CALL key will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset.
1.While
2.Dial 001 to turn Automatic Hold on or 000 to turn it off. (Or use the soft keys and VOLUME Up/Down keys to select.)
3.Press the TRSF key to store your selection.
Headset Operation
You can switch between headset mode and handset mode easily. When using headset mode, you press the ANS/RLS key to answer and release calls.
1.While
2.Dial 021 to use the headset [Headset Use: On] or 020 to use the
handset [Headset Use: Off]. (Or use the soft keys and VOLUME Up/Down keys to select.)
3.Press the TRSF key to store your selection.
Note: When you are in headset mode, your speakerphone is disabled and the ANS/RLS key will light steady.
Hot Keypad
Your keyset’s keypad can be made “live” or “hot” so that it is not necessary to lift the handset or press the SPEAKER key before you begin dialling. Calls can be made and features activated by simply dialling the line number, trunk group access code, internal number or feature access code. To activate this feature:
1.While
2.Dial 031 to turn the Hot Keypad on or 030 to turn it off. (Or use the soft keys and VOLUME Up/Down keys to select.)
3.Press the TRSF key to store your selection.
–49 –
