Samsung DCS | Keyset User Guide |
1.Press the TRSF key and dial 104.
2.Enter the name using the dial keypad. Each press of a key selects a character. Pressing a different key moves the cursor to the next position. For example: if your name is “Joanne”, press 5 once to get the letter “J”; then press 6 three times to get the letter “O”; then press 2 once to get “A”. Continue selecting characters using the following table to complete the name.
COUNT | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
|
|
|
|
|
|
DIAL 0 | Q | Z | . | ) | 0 |
DIAL 1 | space | ? | , | ! | 1 |
DIAL 2 | A | B | C | @ | 2 |
DIAL 3 | D | E | F | # | 3 |
DIAL 4 | G | H | I | $ | 4 |
DIAL 5 | J | K | L | % | 5 |
DIAL 6 | M | N | O | ^ | 6 |
DIAL 7 | P | Q | R | S | 7 |
DIAL 8 | T | U | V | ✲ | 8 |
DIAL 9 | W | X | Y | Z | 9 |
DIAL ✲ | : | = | [ | ] | * |
The # key can be used for the following special characters (displayed in this se- quence): # space & ! : ? . , % $ - < > / = [ ] @ ^ ( ) _ + { } ; " → `
Note:
•When the next character you want appears on the same key as the character you just entered, press the VOLUME Up key to move the cursor one space to the right. Press the VOLUME Down key to move the cursor to the left to make any changes.
•Press the “A” key before entering letters if you want lower case (press “A” again to switch back to upper case, and so on).
3. Press the TRSF key to store the name.
– 52 –
