
System Setup
|
|
| Channel Set | ||||
No Disc |
|
|
|
|
|
|
|
Timer Rec. |
|
|
|
|
|
| |
| Antenna/Cable TV | :Antenna | ► |
| |||
Setup |
| Auto Channel Memory | Cable TV | ► |
| ||
|
| Channel Add/Delete |
| ► | |||
|
| RF Output Channel | : CH3 | ► | |||
MOVE |
| ENTER | RETURN | EXIT | |||
|
|
|
|
|
|
|
|
Auto Channel Memory
Total channel numbers : 06/125
Saved channel :
4%
Stop
Channel Set
This feature allows you to manually set the DVD Recorder & VCR’ s tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup.
•Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.
1.With the unit in Stop mode/No Disc mode, press the MENU button.
2.Press the ▲▼ buttons to select Setup, then press the ENTER or ► button.
3.Press the ▲▼ buttons to select Channel Set, then press ENTER or ► button.
4.Press the ▲▼ buttons to select Antenna/Cable TV, then press the ENTER or ► button.
Select the Antenna or Cable TV(Signal Source) that matches the antenna connection you selected on pages 15~17.
•Antenna : Select this if the DVD Recorder & VCR is connected to an indoor or outdoor VHF/UHF antenna. (See pages 15, 17)
•Cable TV : Select this if the DVD Recorder & VCR is connected to a cable TV. (See page 16)
Auto Channel Memory
Auto Channel Memory will automatically seek and store all active channels in your area.
1.With the unit in Stop mode/No Disc mode, press the MENU button.
2.Press the ▲▼ buttons to select Setup, then press the ENTER or ► button.
3.Press the ▲▼ buttons to select Channel Set, then press the ENTER or ► button.
4.Press the ▲▼ buttons to select Auto Channel Memory, then press the ENTER or ► button.
•The DVD Recorder & VCR will automatically search for all available channels in the selected tuner band. This procedure may take a few minutes to complete.
•When finished, the lowest channel will be displayed.
•If you want to stop or cancel scanning, press the ENTER button. Then select ‘YES’.
English - 28