Recording
Recording the Current Channel you are watching
Before you start
1.Check to make sure the antenna cable is connected.
2.Check the remaining time on the disc.
3.Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display.
1.Press the OPEN/CLOSE button and place a recordable disc on the disc tray.
2.Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display.
3.Press the CH/TRK ( 
/ 
) buttons or number buttons to select the channel you want to record.
4.Press the REC SPEED button repeatedly, to select the recording speed (quality).
• XP(High, approx. 1 hour) → SP(Standard, approx. 2 hours) → LP(Low, approx. 4 hours) → EP(Extended Play, approx. 6 hours/8hours)
5.Press the REC button.
• “ 
” is displayed on the screen and recording begins.
6.Press the STOP button to stop or finish a recording in progress.
• The message “Updating the information of disc. Please wait for a moment” is displayed.
Pausing / Resuming
•Press the REC PAUSE button to pause a recording in progress.
•Press the REC PAUSE button again during pause to resume recording.
•You can switch channels by pressing the CH/TRK ( 
/ 
) buttons while recording pauses.
■ Recording will stop automatically if there is no free space left for recording.
■Up to 99 titles can be recorded onto a
■If the power is interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc.
■Recording will stop automatically if a copy protected image is selected.
■Do not use
English - 56
