Samsung GH68-41351F manual Controlling the Camera Remotely, Configuring Settings for Camera

Controlling the Camera Remotely

Set a device as a viewfinder to control the camera remotely.

1.Touch Options ➔ ➔ Remote viewfinder, and then connect the device and the camera using

Wi-Fi Direct.

2.Touch to take a photo remotely using the device as a viewfinder.

Configuring Settings for Camera

Touch to configure settings for Camera. Not all of the following options are available in both still camera

and video camera modes. The available options vary depending on the mode used.

Camera

•Photo size: Select a resolution. Use higher resolution for higher quality. Higher resolution photos take up more memory.

•Metering: Select a metering method. This determines how light values are calculated. Center weighted measures background light in the center of the scene. Spot measures the light value at a specific location. Matrix averages the entire scene.

Video recorder

•Video size: Select a resolution. Use higher resolution for higher quality. Higher resolution videos take up more memory.

Settings

•Location tag: Attach a GPS location tag to the photo.

Note: To improve GPS signals, avoid shooting in locations where the signal may be obstructed, such as between buildings or in low lying areas, or in poor weather conditions.

Tip: Your location may appear on your photos when you upload them to the Internet. To avoid this, deactivate the GPS tag setting.

73