WARNING INDICATORS AND MESSAGES
USB
Message | Icon | Informs that... | Action | |
|
|
|
| |
Fail Printer |
| A problem occured when | • Check the USB cable. | |
Connecting |
| • Try the connection procedure again. | ||
- | connecting the camcorder | |||
Change 'USB | • Switch “USB connect” function to | |||
| via USB to a printer. | |||
Connect' |
| “PictBridge.” | ||
|
| |||
|
|
|
| |
Fail USB Connecting |
| A problem occured when | • Check the USB cable. | |
| • Try the connection procedure again. | |||
Change 'USB | - | connecting the camcorder | ||
• Switch “USB connect” function to “Mass | ||||
Connect' |
| via USB to a PC. | ||
| Storage.” | |||
|
|
| ||
|
|
|
| |
Ink Error | - | There is a problem with the | • Check the ink cartridge. | |
ink cartridge. | • Put a new ink cartridge in the printer. | |||
|
| |||
|
|
|
| |
Paper Error | - | There is a problem with the | • Check the paper in the printer. If there is no | |
paper. | paper, insert paper. | |||
|
| |||
|
|
|
| |
|
|
| • Your camcorder does not support this file | |
File Error | - | There is a problem with the | format. | |
file. | • Try another file recorded on your | |||
|
| |||
|
|
| camcorder. | |
|
|
|
| |
|
| There is a problem with the | • Turn the printer’s power off and on. | |
Printer Error | - | • Contact the printer manufacturer’s service | ||
printer. | ||||
|
| center. | ||
|
|
| ||
|
|
|
| |
Print Error | - | A problem occured during | • Do not remove power source or eject | |
printing. | memory card during printing. | |||
|
|
When there is dew condensation, put the camcorder aside for an hour or two before using it
• What is dew condensation?
Dew condensation occurs when you move a camcorder between locations that have significant temperature difference. The dew condenses on the external or internal parts of the camcorder, and on the reflection lens. When this happens, it may cause the camcorder to malfunction or damage the camcorder when you turn the power on.
•Exactly when does the dew condensation occur?
When you move the camera to a location with a higher temperature than the previous location, or when you move it to a hot area suddenly. Examples:
-You record outside in cold weather during
-You record outside in hot weather after being indoors or inside a car where the A/C was running.
•What can you do?
Turn the power off, detach the battery pack, and leave the camcorder in a dry area for 1 to 2 hours before using it.
