USING THE INTELLI-STUDIO Program
Using the
Step 1. Connecting the USB cable
1.Set the menu setting to “PC Software: On.”
•This is the default setting.
2.Connect the camcorder and the PC with the USB cable.
•A new file saving screen appears with the
•Depending on your version of Windows, the removable disk window also appears.
3.Click “Yes,” the uploading procedure will start. Click “Yes” to confirm.
•If you do not want to save a new file, select “No.”
To disconnect the USB cable
PC Software |
Off |
On |
1 / 1 |
To disconnect the USB cable after completing the file transfer, you must follow these steps:
1.Click the “Safely Remove Hardware icon” icon on the taskbar.
2.Select “USB Mass Storage Device,” and then click “Stop.”
3.If the “Stop a Hardware device” window appears, click “OK.”
4.Disconnect the USB cable from the camcorder and PC.
• Use the provided USB cable.
•Don’t apply excessive force when inserting or extracting the USB cable into/from a USB jack.
•Insert the USB plug into the USB jack with the plug facing in the correct direction.
•Use the AC power adaptor to power the camcorder when transferring files to your computer.
•When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
•If you disconnect the USB cable from the PC or the camcorder while transferring data, the data transmission will stop and the data may be damaged.
•If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the camcorder.
•
•if you have EmoDio (Samsung's MP3 player software) installed on your computer, the EmoDio software may load first when you connect the USB cable.
125
