getting ready to start recording
INSERTING AND REMOVING A MEMORY CARD (NOT SUPPLIED)
❷ ❶ 
To insert a memory card
To eject a memory card
1.Open the battery/memory card cover by sliding the battery/memory card cover switch towards ①.
2.Insert the memory card into the card slot until it softly clicks.
•Make sure that SD/SDHC Card logo is facing up and the camcorder is placed as shown in the figure.
3.Close the battery/memory card cover by sliding the battery/memory card cover switch in the direction of ②.
1.Open the battery/memory card cover by sliding the battery/memory card cover switch towards ①.
2.Gently push the memory card to eject it.
3.Close the battery/memory card cover by sliding the battery/memory card cover switch towards ②.
•To avoid data loss, turn off the camcorder by pressing the power (
) button for one second before inserting or ejecting the memory card.
•Do not format the memory card on a PC.
•Do not remove the power supply (battery pack or AC adaptor) during operations such as recording, playback, formatting, deleting, and editing. Doing so may damage the storage media or data.
•Do not eject a memory card when it is in operation. Doing so may damage the memory card or data.
•Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards. |
|
Card compatibility with the camcorder may vary depending on the manufacturer and the type of |
|
memory card. | 35 |
|
