Samsung HMX-M20SD manual Getting started, Using the Battery Pack

getting started

USING THE BATTERY PACK

Purchase extra battery packs to allow continuous use of your camcorder.

❷ ❶

❸

Inserting the battery pack

Ejecting the battery pack

1.Open the battery/memory card cover by sliding the battery/memory card cover switch towards ①.

2.Insert the battery pack into the battery pack slot until it softly clicks.

-Make sure that the SAMSUNG logo is facing up when the camcorder is placed as shown in the figure.

3.Close the battery/memory card cover by sliding the battery/memory card cover switch towards ②.

1.Open the battery/memory card cover by sliding the battery/memory card cover switch towards ①.

2.Eject the battery pack by sliding the battery release switch towards ③.

3.Close the battery/memory card cover by sliding the battery/memory card cover switch towards ②.

• Use only Samsung-approved battery packs. Do not use batteries from other manufacturers. Other manufacturer's batteries can cause overheating, fire or explosion.

24• Samsung is not responsible for problems that occur you if you use unapproved batteries.