Samsung SCX3405FWXAC, SCX-3405FW manual Select Using the WPS button and click Next

Wireless network setup

5 Select Using the WPS button and click Next.	7 Follow the instructions on the window to set up the wireless network.
	• For models with a display screen, follow the steps below.
	a Press and hold the	(WPS) button on the control panel for
	about 2-4 seconds.

The machine waits up to 2 minutes for the WPS button on the access point (or a router) to be pressed.

b Press the WPS (PBC) button on the access point (or wireless router).

The messages are displayed on the display screen in the order below:

•For models that support WPS button, the above window appears.

•If your machine is connected with a USB cable, the above window does not appear. Disconnect the USB cable if you want to set up the wireless network using the WPS button.

•If you want to set up the wireless network using the USB cable, refer to "Access point via USB cable" on page 163.

-Connecting: The machine is connecting to the access point (or wireless router).

-Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on.

6The next window asks you to check if your access point (or wireless router) supports WPS or not.

If the access point (or wireless router) has a WPS button, select Yes and click Next.

2. Using a Network-Connected Machine 168