Samsung SCX3405FWXAC Settings Click Wireless Wizard, Click Next, Setup is right, click Apply

Wireless network setup

1	Check whether or not the network cable is connected to the machine. If	7 Select the one Network Name(SSID) in the list.
	not, connect the machine with a standard network cable.	• SSID: SSID (Service Set Identifier) is a name that identifies a wireless
2	Start a web browser such as Internet Explorer, Safari, or Firefox and enter	network, access points, and wireless devices attempting to connect
		to a specific wireless network must use the same SSID. The SSID is
	your machine’s new IP address in the browser window.

case sensitive.

For example,

• Operation Mode: Operation Mode refers to the type of wireless connections (see "Wireless network name and network key" on page 156).

3

4

Click Login on the upper right of the SyncThru™ Web Service website.

Type in the ID and Password then click Login.

•ID: admin

•Password: sec00000

-Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment.

-Infrastructure: Allows wireless devices to communicate with each other through an access point.

5	When the SyncThru™ Web Service window opens, click Network	If your network’s Operation Mode is Infrastructure, select the SSID of the
		access point. If the Operation Mode is Ad-hoc, select the machine’s SSID.
	Settings.	Note that “portthru” is the default SSID of your machine.
6	Click Wireless > Wizard.
	8	Click Next.
	Wizard will help you setup the wireless network configuration. However, if	If the wireless security setting window appears, enter the registered
	you want to set the wireless network directly, select Custom.	password (network key) and click Next.
	9	The confirmation window appears, please check your wireless setup. If
		the setup is right, click Apply.

2. Using a Network-Connected Machine 182