Wireless network setup

10 Select Using the WPS button and click Next.

12 Follow the instructions in the window to set up the wireless network.

For models that support the WPS button, the above window appears.

If your machine is connected with a USB cable, the above window does not appear. Disconnect the USB cable if you want to set up the wireless network using the WPS button.

For models with a display screen, follow the steps below:

aPress and hold the (WPS) button on the control panel for about 2-4 seconds.

The machine waits up to 2 minutes for the WPS button on the access point (or a router) to be pressed.

bPress the WPS (PBC) button on the access point (or wireless router).

The messages are displayed on the display screen in the order below:

-Connecting: The machine is connecting to the access point (or wireless router).

-Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on.

If you want to set up the wireless network using the USB cable, refer to "Access point via USB cable" on page 172.

11 The next window asks you to check if your access point (or wireless router) supports WPS or not.

If the access point (or wireless router) has a WPS button, select Yes and click Next.

2. Using a Network-Connected Machine 177

Page 177
Image 177
Samsung SCX-3405FW, SCX3405FWXAC manual Select Using the WPS button and click Next