Samsung SCX-3405FW, SCX3405FWXAC manual Common PostScript problems

Operating system problems

Refer to the Linux User’s Guide that came with your computer for further information on Linux error messages.

Common PostScript problems

The following situations are PS language specific and may occur when several printer languages are used.

Problem	Possible cause	Solution
The PostScript file cannot be	The PostScript driver may not be installed	• Install the PostScript driver (see "Software Installation" on page 133).
printed	correctly.	• Print a configuration page and verify that the PS version is available for
		printing.
		• If the problem persists, contact a service representative.
Limit Check Error report prints	The print job was too complex.	You might need to reduce the complexity of the page or install more memory.
A PostScript error page prints	The print job may not be PostScript.	Make sure that the print job is a PostScript job. Check to see whether the software
		application expected a setup or PostScript header file to be sent to the machine.
The optional tray is not	The printer driver has not been configured to	Open the PostScript driver properties, select the Device Options tab, and set the
selected in the driver	recognize the optional tray.	tray option.
When printing a document in	The resolution setting in the printer driver may	Make sure that the resolution setting in your printer driver matches the one in
Macintosh with Acrobat Reader	not be matched with the one in Acrobat Reader.	Acrobat Reader.
6.0 or higher, colors print
incorrectly

6. Troubleshooting 309